Call us now on 01243 558155
  • LinkedIn
  • Facebook
  • Twitter
Search

Asix

mainProductImageLogo

USB KVM Switch SoC

The AX68004 is a highly integrated single chip and low-cost solution ideally suited for cable/desktop KVM Switch and KVM extender applications. 

Compared with legacy chipset solutions, the AX68004 single chip solution has the advantages of a power management unit with deep sleep mode, manufacture driver for USB device in console - transparent to computers, same mouse sample rate on PC and device sides, integrated DDC (Display Data Channel) Emulation and EDID (Extended Display Identification Data), support for four USB downstream ports in console, up to 7 USB devices in console (HID, Hub, MSC, Audio), and supporting touch screen, touch pad, and writing pad. 

The AX68004 features a single-cycle pipelined 8051/80390 core (up to 96MIPS), 128KB Flash memory, and 32KB RAM. The AX68004 also integrates 4 multi-addressable Device Controllers (compliant with USB Spec 2.0 Full speed), one USB host controller and one USB root hub that supports four downstream ports and each is compliant with USB2.0 Full/Low speed. The AX68004 supports peripheral communication interfaces such as I²C, two SPI bus, two UART (with one supporting 921.6Kbps), two PS/2 host, and 32 GPIOs. In addition, the AX68004 supports cascade interface for 8 and 16-port USB KVM switch application. 

Features
  • Single chip microcontroller with 4-Port USB KVM Switch
  • CPU for Application 8-bit pipelined RISC, single cycle per instruction operating up to 96MHz and 100% software compatible with standard 8051/80390
  • Supports power management unit with deep sleep mode, programmable watchdog timer, three 16-bit timer/counters, and millisecond timer
  • Supports CPU Debugger for connecting to In-Circuit Emulation (ICE) adaptor
  • Supports DMA Controller (7 DMA channels) and memory arbiter for fast data movement during USB protocol stack processing and peripheral communications
  • 1 external interrupt sources with 2 priority levels
  • Program/Data and Flash Memory On-chip 8KB SRAM for CPU program code mirroring
  • Supports In-System Programming (ISP) for initial Flash memory programming via UART or ICE adaptor
  • Supports reprogrammable boot code and In-Application Programming (IAP) to update boot code or run-time firmware through USB or UART interface
  • On-chip 32KB data memory for CPU and packet buffering
  • On-chip 128KB Flash memory for CPU program code
  • On-chip 1KB Flash Information Page for Hardware Configuration
  • Supports Page architecture for flash erase
  • Minimum 100,000 flash program/erase cycles
  • Minimum 10 years flash data retention
  • USB Interfaces Supports 4 multi-addressable Device Controllers and compliant with USB Spec 2.0 Full speed
  • Build-in one USB host controller and one USB root hub that supports four downstream ports and each compliant with USB2.0 Full/Low speed
  • Supports Control, Bulk, Interrupt, and Isochronous transfer types
  • Supports controllable D+ pull-up resistance for upstream ports
  • Supports controllable D+/- pull-down resistance for downstream ports
  • Supports Burst mode transfer for BULK data transfer in Device Controller
  • Supports the downstream SOF synchronization with selected upstream port for ISO data transfer automatically
  • Peripheral Communication Interfaces 2 UART interface (1 supporting DMA mode, Modem control, remote wake-up and up to 921.6Kbps baud)
  • 2 High Speed SPI interface with DMA mode (1 master and 1 slave mode)
  • 5 I²C interface with DMA mode (1 master with EDID Console and 4 slave mode with EDID Slave)
  • 2 PS/2 Host interfaces
  • Up to 4 GPIO ports of 8 bits each (Supports 2 GPIO ports with de-bounce and interrupt function)
  • Programmable Buzzer function
  • Supports KVM switch functions in software Controls 4 computers from a single console
  • Supports PS/2 keyboard/mouse and USB keyboard/mouse
  • Supports keyboard and mouse emulation for error-free booting
  • USB device in console is transparent to computers that support most gaming/multimedia keyboards and multifunction mouse
  • Mouse sample rate on both of downstream and upstream ports is the same
  • Supports DDC (Display Data Channel) emulation and stores the console monitor’s EDID (Extended Display Identification Data)
  • Four computers can share four USB downstream ports in console
  • Supports maximum 7 USB devices in console, including HID, HUB, MSC and Audio Class
  • Supports touch screen, writing pad, and touch pad devices
  • Supports “push buttons” and “hot keys” switching
  • Supports auto-scan mode for monitoring PC operation
  • Integrates on-chip oscillator and 96MHz PLL to operate with external 12MHz crystal
  • Integrates on-chip power-on reset circuit
  • 100-pin LQFP RoHS compliant package
  • Operating temperature range: 0 to +70°C
Next Embedded Products Product
Product Overview
  • Power

    Offering a range of power conversion and power management products.

    Find out more
  • Storage

    Solid State Drive solutions, from micro SD cards and modules to full 2.5” drives.

    Find out more
  • Interface

    Offering a range of interface solutions for Ethernet, fibre, video and display.

    Find out more
  • Wireless

    GSM/GPS and Wifi solutions.



    Find out more
  • Design

    Offering a wide selection of value-added design services, spanning PCB layout through to full product design.

    Find out more
  • Manufacturing

    Delivering the most efficient and cost effective electronic manufacturing solution to the customer.

    Find out more
  • Kitting

    Reduce the total cost of component acquisition and achieve greater profitability.

    Find out more
  • Products

    Franchised component  distribution, focussing on power, storage, interface and wireless solutions.

    Find out more
  • Inventory

    Streamline component procurement and improve your working capital.

    Find out more
E-newsletter sign up

Sign up for our e-newsletters today and keep in touch with our latest news and offers