Call us now on 01243 558155
  • LinkedIn
  • Facebook
  • Twitter
Search

Genesys Logic

mainProductImageLogo

Click here to download USB 2.0 7-port Hub Controller data sheet

Download PDF
data sheet

USB 2.0 7-port Hub Controller

GL854G is Genesys Logic’s premium 7-port hub solution which fully complies with Universal Serial Bus Specification Revision 2.0.  GL854G implements multiple TT architecture that provide dedicated TT* to each downstream (DS) ports, which guarantee Full-Speed(FS) data passing bandwidth when multiple FS device perform heavy loading operations.  The controller inherits Genesys Logic’s cutting edge technology on cost and power efficient serial interface design. GL854G has proven compatibility, lower power consumption figure and better cost structure above all USB 2.0 hub solutions worldwide. 

GL854G implements multiple hub configuration features onto internal mask ROM, which traditionally requires external EEPROM. The microprocessor detects general purpose I/O (GPIO) status during the initial stage to configure hub settings such as (1) declare of compound device (2) gang/individual mode selection…etc.  External EEPROM can be removed if no vendor specified PID/VID or product string is required for the application.

GL854G provides 12MHz clock output that can be used as a reference clock source for multi-chip, hub compound applications. The output clock provides enough driving capacity to support up to 2 devices that connected to the downstream port. The chip-to-chip clock trace is relatively sensitive to PCB noise. Please refers to design guide for PCB layout suggestions.

Features

    Multiple Chip Package (MCP) architecture
   –   Integrates two standard USB 4-port hub silicon dies into single chip
   –    Supports 7 USB 2.0 compliant downstream ports
    Multiple Transaction Translator (MTT)
   –    Provides dedicated TT control logics for each downstream port
   –    Superior performance when multiple FS devices operate concurrently
    Compliant with USB specification Revision 2.0
   –    Upstream port supports both high-speed (HS) and full-speed (FS) traffic
   –    Downstream ports support HS, FS, and low-speed (LS) traffic
   –    Backward compatible to USB specification Revision 1.1
   –    Each downstream port supports status indicator, with automatic and manual modes
   –    Conform to self power and bus power requirements
    Integrated USB transceiver
   –    Compliant with USB electrical requirements
   –    Ultralow power consumption
   –    Improve output drivers with slew-rate control for EMI reduction 
   –    Internal power-fail detection for ESD recovery
    On-chip 8-bit micro-processor
   –    Support customized PID, VID by reading external EEPROM
   –    Support downstream port configuration by reading external EEPROM
    Smart power management features 
   –    Support individual / gang mode over-current detection for all downstream ports
   –    Automatic switching between self-powered and bus-powered modes
    Lower BOM cost
   –    Single external 12 MHz crystal / Oscillator clock input
   –    On-chip 5V to 3.3V power regulator
   –    Built-in upstream port 1.5KΩ pull-up and downstream port 15KΩ pull-down resistors
   –    Support low-cost 24C02 EEPROM
    Features for hub compound applications
   –    Support compound-device (non-removable in downstream ports) by I/O pin configuration
   –    Provide 12MHz clock source for other USB device connected to the downstream ports
    Available package type: 64 pin LQFP package (7x7mm)

Next USB Hub Controllers Product
Product Overview
  • Power

    Offering a range of power conversion and power management products.

    Find out more
  • Storage

    Solid State Drive solutions, from micro SD cards and modules to full 2.5” drives.

    Find out more
  • Interface

    Offering a range of interface solutions for Ethernet, fibre, video and display.

    Find out more
  • Wireless

    GSM/GPS and Wifi solutions.



    Find out more
  • Design

    Offering a wide selection of value-added design services, spanning PCB layout through to full product design.

    Find out more
  • Manufacturing

    Delivering the most efficient and cost effective electronic manufacturing solution to the customer.

    Find out more
  • Kitting

    Reduce the total cost of component acquisition and achieve greater profitability.

    Find out more
  • Products

    Franchised component  distribution, focussing on power, storage, interface and wireless solutions.

    Find out more
  • Inventory

    Streamline component procurement and improve your working capital.

    Find out more
E-newsletter sign up

Sign up for our e-newsletters today and keep in touch with our latest news and offers