Apacer

512GB / 1TB 2.5" SSD

Apacer's  SFD25H-M  Embedded  Solid  State  Drive  is  a  speedy  and  reliable  companion  for  industrial  PC  and laptops. Designed in SATA 6.0 Gb/s interface, the drive can deliver outstanding performance up to 520  MB/s sustained transfer rate, highly suitable to serve as operating system boot drive or storage media of important data.  With  its  compliance  with  the  latest  SATA  specification,  this  cutting  edge  device  supports  power management, which greatly saves in power consumption, making it more environmental and economical than traditional hard disk drives.

Regarding data reliability, the controller unit of  SFD25H-M is built with a powerful ECC engine in the device correcting up to 72bit per  1KB data. For better I/O performance, the controller  unit comes with an external  DDR3  cache  to  strengthen  the  IOPS  (Input  Output  Per Second)  of  the  device,  proving  to  be  the  ideal companion for PC and laptop users.

•   Serial ATA Revision 3.0 Compliance

–        SATA 6.0 Gbps interface

• Backward compatible with SATA 3.0/1.5 Gbps interface

–        ATA Command set

•   Capacities

–        512 GB, 1 TB

•   Performance*

–        Burst read/write: 600 MB/sec

–        Sustained read: up to 510 MB/sec

–        Sustained write: up to 420 MB/sec

–        Random Read (4K): 36,000 IOPS

–        Random Write (4K): 22,000 IOPS

•   Flash endurance design
• Built-in hardware ECC, enabling up to 72 bit correction per 1K Bytes

–        Wear-levelling

–        Flash bad block management

–        S.M.A.R.T.

–        Power Failure Management

–        TRIM

•   NAND Flash Type: MLC
•   MTBF (hours): >1,000,000
•   Temperature ranges

–        Operating:

• Standard: 0°C to 70°C
• Extended: -40°C to 85°C**

–        Storage: -40°C to 85°C

•   Supply voltage

–        5 V ±5%

•   Power consumption (typical)*

–        Active mode: 1,410 mA@5 V

–        Idle mode: 60 mA@5 V

•   Form factor

–        2.5 inch (100.10 x 69.85 x 7.00, unit: mm)

•   Connector

–        7-pin SATA male connector

–        15-pin SATA power connector

•   DDR3 cache for enhanced random performance
•   RoHS compliant